Analytic Geometry › Chapter 6

Quadric Surfaces in Three-Dimensional Space

Cylinders, ellipsoids, paraboloids and hyperboloids, and the solid regions they bound.

6.1Introduction to Quadric Surfaces

A quadric surface is the zero set of a polynomial of degree two in x,y,z:

Ax^2+By^2+Cz^2+Dxy+Exz+Fyz+Gx+Hy+Iz+J=0.

After a rotation and translation, every non-degenerate quadric takes one of the standard forms below. The usual way to picture one is to study its traces: the curves where it meets the planes x=k, y=k, z=k.

SurfaceStandard equationTraces z=k
Ellipsoid\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=1ellipses, |k|\le c
Hyperboloid, one sheet\frac{x^2}{a^2}+\frac{y^2}{b^2}-\frac{z^2}{c^2}=1ellipses for all k
Hyperboloid, two sheets-\frac{x^2}{a^2}-\frac{y^2}{b^2}+\frac{z^2}{c^2}=1ellipses, |k|\ge c
Elliptic cone\frac{x^2}{a^2}+\frac{y^2}{b^2}=\frac{z^2}{c^2}ellipses, a point at k=0
Elliptic paraboloidz=\frac{x^2}{a^2}+\frac{y^2}{b^2}ellipses, k\ge0
Hyperbolic paraboloidz=\frac{x^2}{a^2}-\frac{y^2}{b^2}hyperbolas, two lines at k=0

Cylinders, where one variable is missing, are treated in Section 6.2.

All possible shapes in space

A second-degree equation in x,y,z describes a quadric surface when it is non-degenerate and one of the following when it is not. Completing the squares in each variable decides which.

ShapeStandard equationExample
Sphere(x-x_0)^2+(y-y_0)^2+(z-z_0)^2=r^2x^2+y^2+z^2=25
Ellipsoid\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=1\frac{x^2}{4}+\frac{y^2}{9}+z^2=1
Hyperboloid, one sheet\frac{x^2}{a^2}+\frac{y^2}{b^2}-\frac{z^2}{c^2}=1x^2+y^2-z^2=1
Hyperboloid, two sheets\frac{z^2}{c^2}-\frac{x^2}{a^2}-\frac{y^2}{b^2}=1z^2-x^2-y^2=1
Elliptic cone\frac{x^2}{a^2}+\frac{y^2}{b^2}=\frac{z^2}{c^2}x^2+y^2=z^2
Elliptic paraboloidz=\frac{x^2}{a^2}+\frac{y^2}{b^2}z=x^2+y^2
Hyperbolic paraboloidz=\frac{x^2}{a^2}-\frac{y^2}{b^2}z=x^2-y^2
Elliptic (circular) cylinder\frac{x^2}{a^2}+\frac{y^2}{b^2}=1x^2+y^2=4
Hyperbolic cylinder\frac{x^2}{a^2}-\frac{y^2}{b^2}=1x^2-y^2=1
Parabolic cylinderx^2=4pz (or y^2=4px, ...)x^2=4z
Two intersecting planes\frac{x^2}{a^2}-\frac{y^2}{b^2}=0x^2-y^2=0, the planes y=\pm x
Two parallel planesx^2=a^2,\ a>0x^2=4, the planes x=\pm2
One plane (double plane)x^2=0x^2-2x+1=0, the plane x=1
A line\frac{x^2}{a^2}+\frac{y^2}{b^2}=0x^2+y^2=0, the z-axis
A single point\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=0x^2+y^2+z^2=0, the origin
Empty set\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=-1, and similarx^2+y^2+z^2+1=0 or x^2=-1

The cases in the lower half of the table are the equations with no shape. For example x^2+y^2+z^2-2x+4y-6z+14=0 becomes (x-1)^2+(y+2)^2+(z-3)^2=0, the single point (1,-2,3), while x^2+y^2+z^2-2x+4y-6z+20=0 gives (x-1)^2+(y+2)^2+(z-3)^2=-6 and has no points.

Trace possibilities

The table lists every possible trace of the standard quadrics in the planes z=k, x=k and y=k. The words in brackets give the values of k for each case, and an ellipse becomes a circle when the two semi-axes are equal.

SurfaceTrace in z=kTrace in x=kTrace in y=k
Ellipsoidellipse (|k|<c), point (|k|=c), empty (|k|>c)ellipse (|k|<a), point (|k|=a), empty (|k|>a)ellipse (|k|<b), point (|k|=b), empty (|k|>b)
Hyperboloid, one sheetellipse for every khyperbola (|k|\ne a), two intersecting lines (|k|=a)hyperbola (|k|\ne b), two intersecting lines (|k|=b)
Hyperboloid, two sheetsempty (|k|<c), point (|k|=c), ellipse (|k|>c)hyperbola for every khyperbola for every k
Elliptic coneellipse (k\ne0), point (k=0)hyperbola (k\ne0), two intersecting lines (k=0)hyperbola (k\ne0), two intersecting lines (k=0)
Elliptic paraboloidellipse (k>0), point (k=0), empty (k<0)parabola for every kparabola for every k
Hyperbolic paraboloidhyperbola (k\ne0), two intersecting lines (k=0)parabola opening downparabola opening up
Elliptic cylinderellipse for every ktwo parallel lines (|k|<a), one line (|k|=a), empty (|k|>a)two parallel lines (|k|<b), one line (|k|=b), empty (|k|>b)
Parabolic cylinder z=x^2/a^2two parallel lines (k>0), one line (k=0), empty (k<0)one lineparabola
Hyperbolic cylinderhyperbola for every ktwo parallel lines (|k|>a), one line (|k|=a), empty (|k|<a)two parallel lines for every k
Quadric surfaces and their traces in 3D. Pick a surface and a plane, then slide k. The grey curves are slices of the surface, the orange sheet is the cutting plane and the blue curve is the trace. Drag to rotate.

6.2Cartesian Equations of Cylinders in Space

If an equation does not contain one of the variables, the surface is a cylinder: every line parallel to that variable's axis through a point of the plane curve lies on the surface.

EquationNameAxis direction
x^2+y^2=r^2circular cylinderz
\frac{x^2}{a^2}+\frac{y^2}{b^2}=1elliptic cylinderz
\frac{x^2}{a^2}-\frac{y^2}{b^2}=1hyperbolic cylinderz
x^2=4pzparabolic cylindery

Example

y^2+z^2=9 has no x, so it is the circular cylinder of radius 3 around the x-axis. x^2=4z has no y, so it is a parabolic cylinder whose rulings are parallel to the y-axis.

6.3Cartesian Equations of Ellipsoids

Ellipsoid

\frac{(x-x_0)^2}{a^2}+\frac{(y-y_0)^2}{b^2}+\frac{(z-z_0)^2}{c^2}=1.

The centre is (x_0,y_0,z_0) and a,b,c>0 are the semi-axes. When a=b=c=r it is a sphere. The volume enclosed is V=\tfrac43\pi abc, and every trace is an ellipse, a point, or empty.

Example

Analyse 4x^2+9y^2+36z^2=36.

Divide by 36: \dfrac{x^2}{9}+\dfrac{y^2}{4}+z^2=1. The semi-axes are a=3, b=2, c=1, and the volume is \tfrac43\pi\cdot6=8\pi.

6.4Cartesian Equations of Paraboloids

Definition

Elliptic paraboloid: z=\dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}. Traces z=k>0 are ellipses; traces x=k and y=k are parabolas. The surface opens upward from its vertex at the origin.

Hyperbolic paraboloid: z=\dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}. Traces z=k\ne0 are hyperbolas, the trace z=0 is the pair of lines y=\pm\tfrac bax, and the surface is a saddle at the origin.

Example

z=x^2+y^2: the trace at height k>0 is the circle of radius \sqrt k, and the trace x=0 is the parabola z=y^2. It is a paraboloid of revolution about the z-axis.

z=x^2-y^2: along the x-axis the surface curves up, along the y-axis it curves down.

6.5Cartesian Equations of Hyperboloids

Definition

One sheet: \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}-\dfrac{z^2}{c^2}=1. A single connected surface; the traces z=k are ellipses that grow with |k|. It is doubly ruled, so it is built from straight lines (cooling towers use this).

Two sheets: -\dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}+\dfrac{z^2}{c^2}=1. Two separate surfaces, one for z\ge c and one for z\le-c.

Cone: \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}=\dfrac{z^2}{c^2}, the surface separating the two cases.

Example

x^2+y^2-z^2=1: the trace at height k is the circle of radius \sqrt{1+k^2}, with smallest radius 1 at k=0.

x^2+y^2-z^2=-1: the trace at height k is a circle of radius \sqrt{k^2-1} and exists only for |k|\ge1, so there are two sheets.

6.6Quadric Inequalities and Solid Regions

Replacing "=" with an inequality turns a surface into a solid. For example \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}+\dfrac{z^2}{c^2}\le1 is the solid ellipsoid, and the strict version is its interior. Several inequalities together describe the common part of the regions.

Example: shell

Describe 1\le x^2+y^2+z^2\le4.

It is the spherical shell between radius 1 and radius 2. Its volume is \tfrac43\pi(2^3-1^3)=\tfrac{28\pi}{3}.

Example: paraboloid cap

Describe x^2+y^2\le z\le4.

It is the solid above the paraboloid z=x^2+y^2 and below the plane z=4. The cross-section at height z is a disc of area \pi z, so the volume is

\int_0^4\pi z\,dz=8\pi.

Q6Chapter 6: Quiz and Problems

Common student mistakes

Common errorx^2+y^2-z^2=1 is a hyperboloid of two sheets

CorrectIt has one sheet

Count the minus signs. One minus on the left with +1 on the right gives one sheet. Two minus signs give two sheets.

Common errory^2+z^2=4 is a circle

CorrectIt is a cylinder

A circle needs the extra condition x=\text{const}. With x free the circle is translated along the axis.

Common errorz=x^2-y^2 is a paraboloid of revolution

CorrectIt is a hyperbolic paraboloid (a saddle)

The minus sign makes the horizontal traces hyperbolas.

Common errorThe volume of an ellipsoid is \frac43\pi a^2b^2c^2

CorrectV=\frac43\pi abc

The semi-axes enter once each, as a,b,c and not as their squares.

Common errorEvery trace of a hyperboloid is a hyperbola

CorrectTraces can be ellipses, hyperbolas, lines or a point

The traces depend on the plane. For the one-sheet hyperboloid the horizontal traces are ellipses.

Multiple-choice quiz

1 \dfrac{x^2}{4}+\dfrac{y^2}{9}+\dfrac{z^2}{16}=1 is
2 x^2+y^2-z^2=-4 is
3 z=x^2-y^2 is
4 The volume enclosed by x^2+4y^2+9z^2=36 is
5 In space, y^2+z^2=4 is
6 The trace of x^2+y^2-z^2=1 in the plane x=1 is
7 The trace of z=x^2-y^2 in the plane z=0 is
8 The traces of z=x^2+y^2 in the planes y=k are
9 In space, x^2+y^2=0 describes
10 The equation x^2+y^2+z^2+1=0 describes
11 The trace of z=x^2+4y^2 in the plane z=4 is
12 The surface -x^2-y^2+z^2=1 has
13 x^2=4z is
14 The volume of the solid x^2+y^2\le z\le4 is
Answered 0 of 14 · Correct 0

Written problems

Problem 1. Identify x^2+y^2-4z^2=4 and describe its traces z=k and x=0. (5 marks)

Show solution

Divide by 4: \dfrac{x^2}{4}+\dfrac{y^2}{4}-z^2=1, a hyperboloid of one sheet about the z-axis.

The trace z=k is the circle x^2+y^2=4(1+k^2) of radius 2\sqrt{1+k^2}, smallest at k=0. The trace x=0 is the hyperbola y^2-4z^2=4.

Problem 2. List every kind of trace of the elliptic cylinder \dfrac{x^2}{4}+\dfrac{y^2}{9}=1 in the planes z=k, x=k and y=k. (5 marks)

Show solution

z=k: the ellipse \frac{x^2}{4}+\frac{y^2}{9}=1 for every k.

x=k: y^2=9\bigl(1-\tfrac{k^2}{4}\bigr), so two parallel lines y=\pm3\sqrt{1-k^2/4} for |k|<2, one line for |k|=2, empty for |k|>2.

y=k: x^2=4\bigl(1-\tfrac{k^2}{9}\bigr), so two parallel lines for |k|<3, one line for |k|=3, empty for |k|>3.

Problem 3. Describe x^2+y^2+z^2\le9,\ z\ge0 and find its volume. (3 marks)

Show solution

It is the solid upper half of the ball of radius 3. Its volume is \tfrac12\cdot\tfrac43\pi\cdot3^3=18\pi.

Problem 4. Identify x^2+y^2+z^2-2x+4y-6z+5=0, giving its centre and radius. (4 marks)

Show solution

(x-1)^2+(y+2)^2+(z-3)^2=1+4+9-5=9. It is the sphere with centre (1,-2,3) and radius 3.

Problem 5. Describe the traces of z=x^2-y^2 in the planes z=1, z=-1 and z=0. (5 marks)

Show solution

z=1: x^2-y^2=1, a hyperbola opening along the x-axis. z=-1: y^2-x^2=1, a hyperbola opening along the y-axis. z=0: x^2=y^2, the lines y=\pm x.

Problem 6. Reduce 4x^2+9y^2+36z^2-8x+18y-72z+13=0 to standard form and name the surface. (6 marks)

Show solution

4(x-1)^2-4+9(y+1)^2-9+36(z-1)^2-36+13=0, so 4(x-1)^2+9(y+1)^2+36(z-1)^2=36, that is

\frac{(x-1)^2}{9}+\frac{(y+1)^2}{4}+(z-1)^2=1.

It is an ellipsoid with centre (1,-1,1) and semi-axes 3, 2, 1.

Short essay

Essay. Explain how traces are used to identify a quadric surface. Use the ellipsoid, the elliptic paraboloid and the hyperboloid of one sheet as examples. (about 150 words)

Show model answer

A trace is the curve where the surface meets a plane such as z=k. Reading how the traces change with k reveals the surface. For the ellipsoid, the traces are ellipses that shrink to points at |k|=c and are empty beyond. For z=\frac{x^2}{a^2}+\frac{y^2}{b^2} the traces z=k are ellipses for k>0, while the traces x=k and y=k are parabolas. For the one-sheet hyperboloid, the traces z=k are ellipses for every k, growing with |k|, and the vertical traces are hyperbolas. A good answer uses horizontal and vertical traces together.